TigerStop has released TigerRack, a rack-and pinion-driven automated position system, and the latest addition to the family of Built Metal Tough products.
Simpson Strong-Tie’s Quik Drive BGP300 auto-feed screw driving system fastens metal roofing and siding with hex-head screws and washers.
PPG Industries and Steelscape have introduced Dazzle metallic coverings for walls, ceilings and other interior surfaces and accessories.
Novelis’ pre-painted cladding sheet ff2ECOplus is an aluminum façade. It features high strength and durability and boasts low life-cycle maintenance requirements.
Moz Designs has introduced Rolling Waves, an undulating wall composition that serves as the most recent addition to the Moz Tides series.
Milwaukee Electric Tool Corp.’s M18 Cordless 5 3/8-inch metal saw has a 4-pole frameless motor for 35 percent more cutting power than its predecessor.
Metabo Corp. has added the W24-230 large angle grinder to its Metabo Metal Masters series.
Makita’s new 18V Compact Lithium-Ion Cordless 1/2-inch Driver-Drill model LXFD01CW is powered by a two-piece, four-pole motor with strong front-end ball bearings.
Kett Tool’s KSV-432 Vacuum Saw is powered by a 5-amp, variable speed, 2,500 RPM motor and uses replaceable tool steel saw blades.
The iSpan steel floor joist technology is stronger and faster to construct than traditional wood materials and also is fire resistant.
The cordless SIW 18T-A CPC lithium ion high torque impact wrench from Hilti delivers 10 percent more torque than its predecessor.
Dri-Design’s new Tapered Series architectural metal wall panel system allows each panel face to taper top to bottom, bottom to top, left to right or right to left.
Cooper B-Line has introduced the Arista Monolithic Rooftop Mounting System for solar photovoltaic commercial rooftop applications.
Bosch has introduced the MX25E Oscillating Multi-Tool, designed to ease flush-cutting, plunge cutting, sanding, grinding, grout removal and scraping.
More than 26,000 square feet of CF insulated panels from Metl-Span, Lewisville, Texas, were used to clad the inhabited portion of the combination office building and parking structure.
Metalwërks Arcwall ACM panels with zinc composite material manufactured by Alcoa Cladding Systems, Pittsburgh, and Rheinzink America Inc., Woburn, Mass., were used on the project.
Cladding the building is 4,300 square feet of 1-mm, 20-gauge Rheinzink flat lock zinc panels in pre-weathered blue-gray from Rheinzink America Inc., Woburn, Mass.
he bank utilizes 16-inch LokSeam standing seam roof panels from MBCI, Houston.
The project uses 5,193 square feet of 0.040-gauge aluminum Kalzip 65/400 in a standing seam profile with a 6/8-inch perforated pattern on the exterior and 4,155 square feet of Kalzip 65/400 solid for
The Formawall Dimension panels were selected for the project because of their performance features, as well as their aesthetic and sustainable benefits.
Steel and glass garage-style doors roll up to allow natural daylight and fresh air while wide-open, transparent workspaces further the company’s commitment to an open office environment.
Rigid Wall (MFR160) and mitered corners from Atas International Inc., Allentown, Pa., were selected for the new union hall.
A rigid frame system from Varco Pruden Buildings, Memphis, was used for this project.
The project utilized 54 pieces of bow string joists, 450 squares of 2-inch-deep composite floor deck and 340 squares of 1.5B roof deck from Nucor Vulcraft Group, St. Joe, Ind.
This two-story building was built for agricultural equipment manufacture.
Metal building suits the needs of a growing environmental nonprofit.
-
The Consortium for Global Development helps U.S.-based businesses tap into the $130 billion global development marketplace through its free database, the Global Contractors Library.
-
Macsteel Service Centers USA, Newport Beach, Calif., has announced the acquisition of the assets and business of Steel Coil Services, Catoosa, Okla., a subsidiary of United States Steel Corp., Pittsburgh.
Pittsburgh-based PPG Industries’ industrial coatings business is offering a new capabilities brochure that highlights its high-performance products, technical resources, global service network and commitment to sustainability.
The Washington, D.C.-based American Iron and Steel Institute has launched a new network of websites that includes a redesign of its flagship site, steel.org, as well as an updated online presence for the Steel Recycling Institute and the Steel Market Development Institute, both business units of...
The Washington, D.C.-based Associated General Contractors of America has released a national plan proposing measures to stimulate demand for construction.
-
The Glenview, Ill.-based Metal Construction Association elected its 2011 board of directors and officers at its recent annual meeting in San Diego.
-
West Chester, Ohio-based ClarkWestern Building Systems and Columbus, Ohio-based Dietrich Metal Framing have united to form ClarkDietrich Building Systems.
Keynoters predict U.S. manufacturing rebound.