This high-performance insulation and finishing system is designed for roofs and walls in new and retrofit buildings.
This high-performance insulation is made with natural materials and recycled content.
The fastener features a unique drill point designed to cut through metal roof decks into structural purlins.
The two-parrt liquid is sprayed in place and expands quickly to fill all gaps and voids in a wall structure.
The improved product line offers exceptional ruggedness.
The new large angle grinder delivers 2,000 watts of power.
The new thermal isolation system is designed for use with continuous-insulation rainscreens.
This insulation solution features rigid panesl that attached to purlins in metal buildings.
This innovative three-in-one system enables a thin wall profile with continuous insulation.
The harness features flame-resistant and non-conductive properties.
This versatile structural wall panel can be oriented horizontally or vertically.
-
Testing.
Guardrail system exceeds OSHA fall protection requirements.
The stainless steel photovoltaic mounting disck is designed to ensure conductivity with anodized aluminum module frames.
-
Two profiles of horizontal wall panel are designed to provide superior wind uplift resistance.
The six new snips are made with corrosion-resistant metal.
It is a new air, water, thermal, and vapor barrier panel.
The standing seam metal roofing system features a classic look.
The horizontal wall panel is ideal for architectural applications.
The innovative side-screw design eliminates build-up.
The wall system features a smooth or embossed profile with a variety of module widths.
The system installs easily and without penetrations using brackets and a modular click rail.
The tool provides general contractors and metal fabricators five saws in one.
The system combines innovative design with high-strength steel.
The Smart-R wall solution offers high-performance architectural cladding and seamless integration.
The die-cast aluminum snow guard has been designed to fit 1-inch snap lock panels.
Stainless steel was considered, but ultimately zinc was chosen for the project.
Metal panels were used in the refurbishment of the 110-foot-tall cross.
Metal's inherent flexibility suited the unique shape of the roof.
Metal helped facilitate a fast and efficient construction schedule.
The building combines traditional Armenian elements with modern American design.
The roof features a standing seam metal roof system in dark bronze.
A rigid frame metal building system was chosen for this house of worship.
The outpatient facility offers advanced services normally only found in full-service hospitals.
Insulated metal wall panels clad the full-service hospital.
The addition required a visually compelling and functional sunshade.
A failing metal roof was retrofitted with a standing seam metal roof system.
The renovation features prominent curves and complex radiuses.
The building features sloped roof planes and high-tech geometric forms.
The rainscreen system helps prevent moisture from entering the wall cavity.
Metal helped the project achieve its sustainability, aesthetic, and performance goals.
The not-for-profit academic medical center is one of the busiest health-care facilities in New Jersey.
The historic doctor's office is part of the Samaritan Regional Health System.
-
Lancaster, Pa.-based Armstrong World Industries has acquired Intalite, a firm that operates under the name Simplex and is based in Montreal, Quebec, Canada.
-
Firm announces its environmental product declaration at Greenbuild.
-
Curvable metal track manufacturer moves to Oklahoma City, Okla.
-
Sherwin-Williams has introduced a free iPad app for designers and architects.
The expansion will more than double the plant's anodizing capacity.
The Reflective Insultation Manufacturers Association International has launched a new-look website.
The party took place at the Georgia Dome and featured a visit from the Atlanta Falcons Cheerleaders.
-
Nucor has donated a metal building to John Brown University.
-
The strategic alliance will offer greater global distribution.
The 20-page, full-color catalog illustrates the company's full line of products.
-
The NASCAR legend will kick off the 2012 International Roofing Expo in Orlando.
-
The acquisition provides MetFab with national exposure.
-
The Fabricators and Manufacturers Association, International, has elected new members to its board of directors.
-
The American Iron and Steel Institute will recognize the contributions of longstanding members.
-
With an attendance of 5,525, the 2011 METALCON International finished slightly higher than the 2010 event.
-
The Bradbury Group in Moundridge, Kan., and Denver-based New Tech Machinery have announced a strategic alliance.
-
Ivyland, Pa.-based Drexel Metals has announced the acquisition of Jessup, Md.-based Metal-Fab Manufacturing, a provider of custom metal roofing and architectural sheet metal solutions.
-
The 2012 International Roofing Expo is offering attendees and exhibitors the opportunity to give back to the Orlando community during Community Service Day on Tuesday, February 21, 2012.
-
Following of a period of weakness in design activity, the Washington, D.C.-based American Institute of Architects’ Architecture Billings Index (ABI) moved upward in August 2011.
-
The Glenview, Ill.-based Metal Construction Association, the main sponsor of METALCON International, will present metal roof, wall, and tool demonstrations at Booth 108 at next week’s show.
SPECwise has developed a new service for contractors and suppliers to get a comlete roof takeoff.
Perry comes aboard MCA as its new technical and research manager.
New CSI formatted specification documents are available from OMG Roofing Products
-
With a grant from the Texas Workforce Commission, the initiative will develop local jobs.
-
Distribution agreement is a part of McElroy's strategic plan to expand their retrofit system.
MBMA has developed a webinar series covering energy codes.
-
Partnership to expand the company's focus on insulated metal panels.
Kriner has completed USGB's requirements to earn the LEED AP for Operations and Management specialty title.
A new microsite examines the advantages, costs, sustainability, and durability of hot-dip galvanized steel in transportation.
-
Kentucky Centria plant earns safety honor.
-
Heidi Biggs Brock to take over as the president of the Aluminum Association.
-
The event is co-sponsored by AISI and the National Science Foundation, and hosted by the University of North Texas.
-
The Washington, D.C.-based American Institute of Architects announced that it has added 31 documents to its AIA Documents-on-Demand service, bringing the total number of documents available to 79.
The Bilco Co. in New Haven, Conn., has introduced new building information modeling (BIM) objects for the company’s line of specialty access products.
Allentown, Pa.-based Atas International released its new color chart at Metalcon International in Atlanta, Ga.
-
New York-based global investment firm KKR has purchased Red Wing, Minn.-based fall-protection equipment manufacturer Capital Safety from London-based Arle Capital Partners, a firm that had owned the company since 2007.
-
The Glenview, Ill.-based Metal Construction Association will be hosting its 2012 Annual Meeting at the Hyatt Regency Clearwater Beach in Clearwater, Fla., on Jan. 22-24.
-
The Board of Directors of the Washington, D.C.-based American Iron and Steel Institute recently elected John P. Surma, the chairman and chief executive officer of Pittsburgh-based U. S. Steel, as AISI chairman.
Woven stainless steel mesh provides the necessary look and durability.
-
In the interest of making accurate information and reliable resources as accessible as possible, the Olathe, Kan.-based Reflective Insulation Manufacturers Association International (RIMA-I) recently updated its website with a whole new look.
-
A comprehensive 20-page product showcase catalog is now available from Lewisville, Texas-based Metl-Span.
-
Cleveland-based Sherwin-Williams has introduced a free iPad app.
MRTALPR4 series vacuum lifters feature flexible vacuum pads, movable pad mounts and adjustable T-arms to accommodate a wide variety of insulated panel sizes and contours.
Sno Gem’s snow guards are designed for metal, slate, tile, shingle, and membrane roof systems.
-
The Cleveland-based Metal Building Manufacturers Association has announced a webinar that will give attendees knowledge of building code requirements for protecting buildings from fire and offer an advanced understanding of how to do so.
-
The Washington, D.C.-based American Iron and Steel Institute is working in cooperation with the Wei-Wen Yu Center for Cold-Formed Steel Structures at the Missouri University of Science and Technology to co-sponsor the 22nd Short Course on Cold-Formed Steel Structures for engineers at the Drury...
-
“The Colors of Centria” brochure, which showcases the company’s variety of coating systems, palette of colors, and extensive range of substrates and textures, has been expanded and now includes the company’s innovative Kolorshift Series colors.