-
More than 26,000 square feet of CF insulated panels from Metl-Span, Lewisville, Texas, were used to clad the inhabited portion of the combination office building and parking structure.
-
Metalwërks Arcwall ACM panels with zinc composite material manufactured by Alcoa Cladding Systems, Pittsburgh, and Rheinzink America Inc., Woburn, Mass., were used on the project.
-
Cladding the building is 4,300 square feet of 1-mm, 20-gauge Rheinzink flat lock zinc panels in pre-weathered blue-gray from Rheinzink America Inc., Woburn, Mass.
-
he bank utilizes 16-inch LokSeam standing seam roof panels from MBCI, Houston.
-
The project uses 5,193 square feet of 0.040-gauge aluminum Kalzip 65/400 in a standing seam profile with a 6/8-inch perforated pattern on the exterior and 4,155 square feet of Kalzip 65/400 solid for
-
The Formawall Dimension panels were selected for the project because of their performance features, as well as their aesthetic and sustainable benefits.
-
Steel and glass garage-style doors roll up to allow natural daylight and fresh air while wide-open, transparent workspaces further the company’s commitment to an open office environment.
-
Rigid Wall (MFR160) and mitered corners from Atas International Inc., Allentown, Pa., were selected for the new union hall.
-
A rigid frame system from Varco Pruden Buildings, Memphis, was used for this project.
-
The project utilized 54 pieces of bow string joists, 450 squares of 2-inch-deep composite floor deck and 340 squares of 1.5B roof deck from Nucor Vulcraft Group, St. Joe, Ind.